Spectrum™ II Premier S2-900P


Superior technology for the latest generation semiconductor packages
  • •The Spectrum II Premier S2-900P implements new jetting, vision and software technologies to meet even the most challenging dispensing requirements
  • •The S2-900P incorporates the new IntelliJet® Jetting System, which dispenses the smallest dots and lines with market-leading reliability and consistency
  • •The new Monocle™ Vision Package delivers expansive field of view and contrast capabilities
  • •Pre-configured with common options for advanced packaging processes:
  • •High precision X-Y-Z motion system for best-in-class wet dispense accuracy
  • •Patented, closed-loop process controls for dispense weight
  • •High-accuracy, non-contact laser height sensor
  • •Fids-on-the-Fly™ and advanced packaging software suite for high throughput
  • •Substrate heating controls for up to six zones
  • •Wet dispense Cpk is tested against Nordson ASYMTEK standard sealant line path accuracy test method
  • •Z-gap repeatability is tested with Nordson ASYMTEK standard white ceramic, performance with other substrates may vary
  • •Contact factory regarding smaller boards/carriers
  • •System weight varies depending on configuration
Motion System "Z repeatability (1): ±15 μm (0.0006 in.), 3 sigma
X-Y repeatability (1): ±15 μm (0.0006 in.), 3 sigma
X-Y acceleration: 1 g peak
X-Y velocity: 1 m/s peak (40 in./s)
X-Y-Z encoder resolution: 1 μm"
Wet Dispensing Accuracy & Repeatability Single Applicator:
Cp ≥ 1.0: ±35 μm (0.0016 in.)
pk ≥ 1.0(1): ±40 μm (0.0016 in.)
Z-Gap Performance Z-Gap Repeatability (2): ±15 μm (0.0006 in.), 3 sigma
Minimum Z-Gap Capability: 50 μm (0.002 in.)
Dispense Area 339 x 410 mm (13.3 x 16.1 in.)
Conveyor Max. board/carrier thickness: 12 mm (0.5 in.)
Max. board/carrier length: One station: 340 mm (13.4 in.) Three stations: 320 mm (12.6 in.)
Min. board/carrier length: 25 mm (1.0 in.)
Max. board/carrier width: Single lane: 535 mm (21.1 in.) Dual lane: up to 228 mm (9.0 in.) (configuration dependent)
Power Supply 200-240 VAC, 47-63 Hz single phase, 30 A
Air supply source Two air supplies: one with 3 CFM @ 100 psi for contact tooling, a second one with 1 CFM @ 100 psi for the rest of the system (100 psi = 689 kPa, 6.8 atm)
System footprint Single heat station: 600 mm wide x 1321 mm deep (23.6 x 52.0 in.)
Two heat stations: 850 x 1321 mm (33.5x52.0 in.)
Three heat stations: 1100 x 1321 mm (43.3x52.0 in.)
Weight 377-422 kg (830-930 lbs.)